BendPak XPR-18CL-192

Category:

Description

18K Capacity / Clearfloor / 192″ O.A. Height

 

 

 

 

 

 

 

 

 

 

  • 7,000-lb. lifting capacity
  • Telescoping Low-Pro™ arms for sports cars
  • Bi-metric asymmetric & symmetric arm configuration
  • Lowered arm tube supports
  • Automatic arm restraints
  • Single release-point operation
  • Taller lift carriages
  • Automatic safety locks
  • Single hidden hydraulic cylinder
  • (2) redundant safety cables
  • Multiple lock positions

Capacity

Lifting Capacity* 18,000 lbs. (8,165 kg)
*Max Capacity / Front Axle
9,000 lbs. (4,082 kg)
*Max Capacity / Rear Axle 9,000 lbs. (4,082 kg)

Rise

A – Rise: 69″ (1,753 mm)
B – Rise + Pad Only: 74″ (1,880 mm)
C – Rise + Pad + 63 mm Adapter 80″ (2,032 mm)
D – Min. Height + Pad: 5″ (127 mm)
Time to Full Rise: 45 seconds

Outside Dimensions

E – Height Overall: 170″ (4,318 mm)
F – Width Overall: 155″ (3,937 mm)
G – Outside Columns 144″ (3,658 mm)

Inside Dimensions

H – Inside Columns: 120″ (3,048 mm)
I – Drive-Thru Clearance: 106″ (2,692 mm)
J – Floor To Overhead Switch: 165″ (4,191 mm)

Arms & Pads

K – Front Arm Reach: (MIN) 39″ (991 mm)
K – Front Arm Reach: (MAX) 60″ (1,524 mm)
L – Rear Arm Reach: (MIN) 39″ (991 mm)
L – Rear Arm Reach: (MAX) 60″ (1,524 mm)
Max Load Per Arm 4,500 lbs. (2,041 kg)

Power Unit

Motor: 220 VAC / 60 Hz / 1 Ph
Noise: 45 dB

Shipping

Weight: 2,726-lbs. (1,236 kg)
Dimensions: 175” x 29” x 34” (794 mm x 737 mm x 864 mm)

Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).

Owners Manual Sales Sheet