BendPak HDSO14AX

Category:

Description

14,000 Lb. Capacity / Alignment / Extended / Open Front / Includes Turnplates and Slip Plates

 

 

 

 

 

 

 

 

  • 14,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Heavy‐duty turn plates and integrated rear slip‐plates included
  • Multi‐position turn plate pockets
  • Automatic leveling system
  • Multiple auto-leveling locking positions
  • Runways include rail‐kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks, and sheaves
  • Internal “Anti-Sway” UHMW slider blocks in each column
  • Features oversize sheaves and heavy‐duty 1/2” aircraft cable
  • Rugged 1‐3/8” roller axles and oversize self‐lubricating cable sheaves
  • Multi‐position safety locks in each column with push‐button safety release
  • Runways adjust for different tread widths and feature non‐skid surface
  • Optional 7,000-lb. capacity bridge jacks available (Model RJ‐7) 14,000-lb. lifting capacity

Capacity

Lifting Capacity* 14,000 lbs. (6,350 kg)
*Max Capacity / Front Axle 7,000 lbs. (3,175 kg)
*Max Capacity / Rear Axle 7,000 lbs. (3,175 kg)

Rise

A – Min. Runway Height: 7.625″ (194 mm)
B – Max. Rise: 70″ (1,778 mm)
C – Max. Lifting Height: 77.625″ (1,972 mm)
Time to Full Rise: 60 seconds
D – Overall Width (FRONT)
143” (3,632 mm)
E – Overall Width (REAR) 130” (3,301 mm)
F – Outside Length 215″ (5,472 mm)
G – Overall Length 243″ (6,191 mm)
H – Height of Columns (FRONT) 105″ (2,664 mm)
I – Height of Columns (REAR) 103” (2,613 mm)
J – Width Between Columns (FRONT) 123” (3,124 mm)
K – Width Between Columns (REAR) 120” (3,046 mm)
L – Drive-Thru Clearance 97” (2,464 mm)
M – Runway Width 20.5” (520 mm)
N – Length of Runways 199″ (5,054 mm)
O – Width Between Runways 45″ (1,143 mm)
P – Min. 4-Wheel Alignment 89″ (2,261 mm)
Q – Max. 4-Wheel Alignment 156″ (3,962 mm)
R – Max. 2-Wheel Alignment 182″ (4,623 mm)

Minimum Wheelbase

Rated Capacity: 140″ (3,556 mm)
75% Capacity: 120″ (3,048 mm)
50% Capacity: 100″ (2,540 mm)
25% Capacity: 80″ (2,032 mm)

Locking

Locking Positions:
13
Lock Spacing:
4

Power Unit

Motor:
220 VAC / 60 Hz / 1 Ph
Noise:
45 dB

Shipping

Weight:
3,586-lbs. (1,626 kg)
Dimensions:
240” x 23” x 41” (6,096 mm x 584 mm x 1,041 mm)

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).