BendPak HDS40

Category:

Description

40,000 Lb. Capacity / Standard

  • 40,000-lb. lifting capacity
  • Supersized 12″ diameter cable sheaves
  • Galvanized lifting cables
  • Grease nipples
  • Single hydraulic under-runway cylinder
  • Integrated flow restrictor
  • Durable powder coat
  • Spring-loaded safety locks
  • Second lock system on constant guard
  • Fully enclosed lifting cables
  • Multiple adjustable height locking positions
  • Maintenance-free electric hydraulic power system
  • Conveniently positioned operator controls
  • 12″ x 12″ base plates
  • Non-skid runways
  • Optional rolling jacks

Capacity

Lifting Capacity*
40,000 lbs. (18,144 kg)
*Max Capacity / Front Axle
20,000 lbs. (9,072 kg)
*Max Capacity / Rear Axle
20,000 lbs. (9,072 kg)

Rise

A – Min. Runway Height: 8.5″ (216 mm)
B – Max. Rise: 60″ (1,524 mm)
C – Max. Lifting Height: 68.5″ (1,740 mm)
Time to Full Rise: 75 seconds

Outside Dimensions

D – Overall Width: 154″ (3,912 mm)
E – Outside Length: 257″ (6,528 mm)
F – Overall Length: 297″ (7,544 mm)
G – Height of Columns: 93″ (2,362 mm)

Inside Dimensions

H – Width Between Columns: 134″ (3,404 mm)
I – Drive-Thru Clearance: 109″ (2,769 mm)

Runways

J – Runway Width: 28″ (711 mm)
K – Length of Runways: 250″ (6,350 mm)
L – Width Between Runways: 36″ (914 mm) or 47″ (1,194 mm)
M – Runway Centerline: 64″ (1,626 mm) or 75″ (1,905 mm)
N – Outside Edge of Runways: 92″ (2,337 mm) or 103″ (2,616 mm)

Minimum Wheelbase

Rated Capacity: 185″ (4,699 mm)
75% Capacity: 160″ (4,064 mm)
50% Capacity: 135″ (3,429 mm)
25% Capacity: 110″ (2,794 mm)

Locking

Locking Positions:
9
Lock Spacing:
Every 6″ / 152 mm

Power Units

Motor:
220 VAC / 60 Hz. 1Ph.
Noise:
45 dB

Shipping

Weight:
6,748-lbs. (3,060 kg)
Dimensions:
265” x 31” x 36” (6,731 mm x 787 mm x 914 mm)

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).

Owners Manual Sales Sheet