BendPak HDS14X

Category:

Description

14,000 Lb. Capacity / Extended / Limo Style

 

 

 

 

 

 

  • 14,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Mid to long-style approach ramps for low ground clearance vehicles
  • Runways include rail-kit for optional accessories
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Pneumatic push-button safety release
  • Features heavy-duty 1/2″ aircraft cable
  • Safety locks enclosed in columns minimize pinch points
  • Oversized sheave diameter reduces cable fatigue
  • Oversized self-lubricating cable rollers
  • Rugged 1.75″ roller axles
  • Multi-position safety locks in each column
  • Customizable power unit location
  • Approach ramps incorporate built-in rear-wheel chocks
  • Independent backup slack-cable safety latches
  • Runways feature non-skid surface
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional 7,000-lb. capacity rolling jacks available (Model R​BJ7000)
  • ETL approved

Capacity

Lifting Capacity*
14,000 lbs. (6,350 kg)
*Max Capacity / Front Axle
7,000 lbs. (3,175 kg)
*Max Capacity / Rear Axle
7,000 lbs. (3,175 kg)

Rise

A – Min. Runway Height: 7.625″ (194 mm)
B – Max. Rise: 70″ (1,778 mm)
C – Max. Lifting Height: 77.625″ (1,972 mm)
Time to Full Rise: 60 seconds

Outside Dimensions

D – Overall Width: 130″ (3,302 mm)
E – Outside Length: 243″ (6,172 mm)
F – Overall Length: 271″ (6,883 mm)
G – Height of Columns: 93″ (2,362 mm)

Inside Dimensions

H – Width Between Columns: 120″ (3,048 mm)
I – Drive-Thru Clearance: 98″ (2,489 mm)

Runways

J – Runway Width: 20″ (508 mm)
K – Length of Runways: 229″ (5,817 mm)
L – Width Between Runways: 37.5″ (953 mm) or 51″ (1,295 mm)
M – Runway Centerline: 57.5″ (1,461 mm) or 71″ (1,803 mm)
N – Outside Edge of Runways: 77.5″ (1,969 mm) or 91″ (2,311 mm)

Minimum Wheelbase

Rated Capacity: 165″ (4,191 mm)
75% Capacity: 140″ (3,556 mm)
50% Capacity: 115″ (2,921 mm)
25% Capacity: 95″ (2,413 mm)

Locking

Locking Positions:
13
Lock Spacing:
Every 4″ (102 mm)

Power Unit

Motor:
220 VAC / 60 Hz / 1 Ph
Noise:
45 dB

Shipping

Weight:
2,735 lbs. (1,240.5 kg)
Dimensions:
239” x 22” x 42” (6,070 mm x 558 mm x 1,066 mm)

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).

Owners Manual Sales Sheet