BendPak HD-9AE

Category:

Description

9,000 Lb. Capacity / Alignment / Includes Turnplates and Slip Plates

 

 

 

 

 

 

  • 9,000-lb. maximum lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Multi-caster slip plates
  • Dual radius plate positions
  • Heavy-duty stainless steel lifting cables
  • Dual-hub cable sheaves
  • Grease nipples on every sheave and sheave axle
  • Single hydraulic cylinder
  • Integrated hydraulic flow restrictor
  • Durable powder-coat finish
  • Spring-loaded safety locks
  • Simple push-button lock release
  • Aircraft-quality stainless steel and aluminum pneumatic cylinders
  • Secondary lock system
  • Fully enclosed cables, airlines, safety latches and sheaves
  • Multiple adjustable height locking positions
  • Maintenance-free power system
  • Easy-to-reach operator controls
  • Non-skid runways

Capacity

Lifting Capacity* 9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle
4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle 4,500 lbs. (2,041 kg)

Rise

A – Min. Runway Height: 6.5″ (165 mm)
B – Max. Rise: 70″ (1,778 mm)
C – Max. Lifting Height: 76.5″ (1,943 mm)
Time to Full Rise: 60 seconds

Outside Dimensions

D – Overall Width: 127″ (3,226 mm)
E – Outside Length: 224″ (5,690 mm)
F – Overall Length: 88″ (2,235 mm)
G – Height of Columns:

Inside Dimensions

H – Width Between Columns: 117″ (2,972 mm)
I – Drive-Thru Clearance: 103.5″ (2,629 mm)

Runways

J – Runway Width: 19″ (483 mm)
K – Length of Runways: 188″ (4,775 mm)
L – Width Between Runways: 40″ (1,016 mm)

Alignment

M – Min. 4-Wheel Alignment: 71″ (1,803 mm)
N – Max. 4-Wheel Alignment: 145″ (3,683 mm)
O – Max. 2-Wheel Alignment:
160″ (4,064 mm)

Minimum Wheelbase

Rated Capacity: 135″ (3,429 mm)
75% Capacity: 115″ (2,921 mm)
50% Capacity: 95″ (2,413 mm)
25% Capacity: 80″ (2,032 mm)

Locking

Locking Positions:
12
Lock Spacing:
4

Power Unit

Motor:
220 VAC / 60 Hz / 1 Ph
Noise:
45 dB

Shipping

Weight:
2,292-lbs. (1,039 kg)
Dimensions:
190” x 21” x 37” (4,826 mm x 533 mm x 939 mm)

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).

Owners Manual Sales Sheet