BendPak HD-9

Category:

Description

9,000 Lb. Capacity / Standard Width

 

 

 

 

 

 

  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Freestanding design
  • Perfect for parking, storage and service
  • Runways accommodate narrow and standard vehicles
  • Runways include rail-kit for optional accessories
  • Electric-hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Oversized self-lubricating cable rollers
  • Features heavy-duty 3/8″ aircraft cable
  • Rugged 1.25″ roller axles
  • Multi-position safety locks in each column
  • Adjustable lock ladders
  • Runways feature non-skid surface
  • Push-button pneumatic safety release
  • Independent backup slack-cable safety latches
  • Customizable power unit location
  • Removable approach ramps for additional drive-under clearance
  • Longer approach ramps for low-ground clearance vehicles
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional solid deck available to increase storage capacity
  • Optional 4,500-lb. air/hydraulic rolling jacks available (Model RBJ4500)
  • ETL Approved

Style

Style: Four-Post Parking Lift

Capacity

Lifting Capacity* 9,000 lbs. (4,082 kg)
A – Min. Runway Height: 4.5″ (114 mm)
B – Max. Rise: 70″ (1,778 mm)
C – Max. Lifting Height: 74.5″ (1,892 mm)
D – Overall Width: 110.25″ (2,800 mm)
E – Outside Length: 174″ (4,420 mm)
F – Overall Length: 200″ (5,080 mm)
G – Height of Columns: 88″ (2,235 mm)
H – Width Between Columns: 100.25″ (2,555 mm)
I – Drive-Thru Clearance:
86.5″ (2,197 mm)
J – Runway Width: 19″ (483 mm)
K – Length of Runways: 164″ (4,166 mm)
L – Width Between Runways: 37.5″ (952 mm) or 44-3/8″ (1,127 mm)
M – Runway Centerline: 56.5″ (1,435 mm) or 63-3/8″ (1,610 mm)
N – Outside Edge of Runways: 75.5″ (1,918 mm) or 82-3/8″ (2,092 mm)
Time to Full Rise 50 seconds
Locking Positions 12
Locking Spacing Every 4″ (102 mm)
Motor 220 VAC / 60 Hz / 1 Ph

Note: An air supply (minimum: 30 psi / 3 CFM) is may be required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).

Owners Manual Sales Sheet